“The AIS MOB100 is an ultra compact AIS MOB beacon/SART. Its designed for manual or auto activation from a lifejacket and when triggered will send the casualty position 8 times a minute to any AIS equipped vessels or shore stations. Range is typically 5-10NM.”
Digital Yacht have teamed up with SIMY to create World’s smallest AIS MOB Beacon (personal SART). SIMY is a division of leading space company Syrlinks (designers of the Rosetta probe). They specialise in miniaturising and low power electronics.
The new MOB100 measures just 115 x 40 x 22mm and weights just 95g. It’s design allows for manual activation or you can attach it to an automatic inflation lifejacket onto either a strap or the lifejacket inflator. Subsequently allowing it to automatically activate when the life-vest inflates. The unique cover design requires just a 1cm downward movement created by the strap and lifejacket inflation to auto activate and therefore deploy the spring antenna. On foam filled life-vests, you can also fit the unit to the outside and set up for manual activation.
The AIS MOB100 Beacon incorporates a super sensitive 72 channel GPS and AIS SART transmitter. When activated, it sends the casualty’s current location as an AIS transmission which can be detected by any vessel equipped with an AIS transponder or even a simple AIS receiver. Above all, every Digital Yacht AIS product is fully compatible with AIS MOB/SART transmissions. The AIS device or plotter display shows a unique MOB target identifier to position the MOB onto the navigation system. Optional devices like Digital Yacht’s AIS LifeGuard can also automatically sound an audio alarm to alert the crew of the emergency MOB situation. Coast and monitoring stations can also pick up the signal. They identify this using a unique signal as a MOB distress situation. Range is typically 5-10nm depending upon sea conditions.
Upon activation, the MOB position is sent 8 times a minute as a priority AIS SART message. The strobe LED will also flash to aid night time recovery. In Addition, if activated accidentally, the MOB100 can be physically reassembled and reset.
Moreover, the MOB100 has a 7 year battery built in which will operate for at least 24 hours continuously when activated. It is also totally waterproof and has a test facility to check operation as required.
In addition, you can download the user guide by clicking here.
Can I buy a battery from a provider and replace it myself?
Never try to open the beacon up. In the event of a malfunction or when the battery replacement date comes up, please contact the Customer Service department: firstname.lastname@example.org
Do I need to take out a subscription to use MOB100?
No. Once the beacon has been purchased, an additional payments are required. Therefore no subscription is necessary to use MOB100.
Does the beacon float?
The beacon does not float.
Does the beacon work abroad?
Yes, the beacon is fitted with the AIS technology, which is also an international standard.
Does the beacon work through thick fog?
The beacon is never affected by bad weather conditions.
How do I know if the beacon is working?
You can test your beacon using the OFF/TEST self-test button. We also recommend that you read the user manual.
How long will my product be under warranty for?
Your MOB100 beacon is under a two-year warranty, valid from the date of purchase.
How often should I run a self-test?
The short test should not be run more than once a week to preserve battery life. The full test should not be run more than once a month.
What happens if I switch the beacon on by mistake? How do I switch it off?
At any time, you can cancel activation by holding the “T” button down for a long time.
What happens if the self-test does not work?
If you observe a malfunction in your beacon (namely during the self-test), please contact Digital Yacht’s Customer Service department. We may require proof of purchase.
What is a beacon’s lifespan?
In normal conditions of use, a beacon’s lifespan is 7 years.
How the beacon works
How to install the beacon
How to reposition the antenna plastic cover
“AIT3000 is a class B AIS transponder with a built-in VHF splitter and with the latest interfacing capability including NMEA 0183, NMEA 2000, USB and a WiFi server.”
“AIS SART Alarm — Connects to any of our AIS devices and detects a SART target — ideal for use as a MOB system with personal SARTs.”
“Ultra-compact AIS Transponder Class B that uses the latest AIS transponder technology to squeeze more performance and interfacing options with half the size of our previous generation transponder. “
“iAISTX is an AIS transponder with Wi-Fi interface designed specifically for the growing number of boaters who use a tablet for their navigation tasks.”
“Entry level AIS Transponder with industry standard NMEA0183 interface and internal GPS antenna that makes installation aboard smaller fibreglass (GRP) boats much quicker and easier.”
“Perfect for PC based navigation systems with USB drivers for PC, MAC and linux.”